3.2 – Test Encryption of Wireless Communication Channels
Here's a professional and structured write-up for your section 3.2 Test Encryption of Wireless Communication Channels:
3.2 – Test Encryption of Wireless Communication Channels
Requirement Description
Verify that wireless communications are transmitted over encrypted channels to ensure confidentiality and prevent tampering or interception of data.
DUT Confirmation Details
(To be filled by OEM/vendor)
Confirmation of encryption protocols used (e.g., WPA2/WPA3, TLS, IPsec, etc.)
Supported wireless security standards
Configuration details for encryption enablement
DUT Software Details
(To be filled by OEM/vendor)
OS/firmware version
Wireless communication module/version
Security protocol stack details
Hash Checksum Verification for DUT’s Software Image
(To be filled post-verification)
Hash Type: SHA256 / SHA512
Verified Hash Value: ___________
DUT Configuration
(To be detailed for test setup)
SSID: ___________
Wireless Protocol: ___________
Security Settings: ___________
Authentication Mode: ___________
Pre-Conditions
The vendor shall provide the following:
Documentation regarding the security measures implemented in the device to prevent tampering of the data during wireless communication.
A formal declaration if the device does not support wireless communication.
Test Plan
Total Number of Test Cases: 3
Scope: Covers encryption validation for wireless interfaces through packet inspection, configuration review, and security handshake verification.
Test-bed Diagram with Interfaces and IPs:
(To be appended with actual test setup – include DUT, wireless client, AP, test tools like Wireshark/Nmap, IP schema, etc.)
Last updated
Was this helpful?